MERIDIAN USER MANUAL

Moonphase Watch

Before using the watch, please remove the crown stopper first, then push the crown back in to activate the watch.

SETTING PROCEDURE

Do not adjust the day of the week or date when the watch displays a time between 9:00 PM and 3:00 AM.

MANUAL

Day of week Setting

1. Pull the watch crown out to position III.

2. Turn the crown clockwise（hour / minute hands） to set the day.

3. Push back the watch crown after setting.

The day of the week, hour and minute are set by the same operation.

Adusting The Time

1. Pull the watch crown out to position III.

2. Rotate the crown to set the correct time.

3. Push back the watch crown. The second hand will immediately start moving.

The day of the week, hour and minute are set by the same operation.

Moon Phases (The Age Of The Moon)

Before setting the moon phases, confirm the time currently displayed on the watch is 12:00 PM.

Advance the hands clockwise. When the date changes over, it is AM.

Check a reliable source for the current moon age. For best accuracy, set at a new moon (0) or full moon (15).

The average period of the moon's age is 29.5 days.

1. Pull the watch crown out to position II.

2. Turn the crown clockwise to advance the moon phase.

3. Push back the watch crown after setting.

Date Setting

Before setting the date, confirm the time currently displayed on the watch is 12:00 PM.

Advance the hands clockwise. When the date changes over, it is AM.

1. Pull the watch crown out to position II.

2. Turn Crown anti-clockwise to correct date.

3. Push back the watch crown after setting

Changing The Straps (Quick Release)

1. Release spring bars at the back by pushing the pin inward.

2. Replace the strap

3. Place one end of the spring bar into the lug hole, then insert spring bars by pushing the pin inward. Make sure the spring bars snap into the lug holes.

⮕Full tutorial