BELFRY USER MANUAL

Sun and moon automatic watch

Before using the watch, please remove the crown stopper first, then push the crown back in to activate the watch.

MANUAL

Winding The Watch

Turn the crown clockwise about 30 times at Position I to start.

Reminder: Belfry automatic watches are powered by wrist movement; wind manually if not worn for more than 24 hours.

Adusting The Time

1. Pull the watch crown out to position III.

2. Rotate the crown to set the correct time.

3. Push back the watch crown. The second hand will immediately start moving.

Sun and moon phases (24 hour)

The Sun & moon display operates on a 24-hour cycle and is automatically synchronized with the time setting.

Date Setting

Before setting the date:

Confirm the time currently displayed on the watch is 12:00PM, ensuring the Sun & Moon phase indicator points to 12.

1. Pull the watch crown out to position II.

2. Turn Crown anti-clockwise to correct date.

3. Push back the watch crown after setting

Changing The Straps (Quick Release)

1. Release spring bars at the back by pushing the pin inward.

2. Replace the strap

3. Place one end of the spring bar into the lug hole, then insert spring bars by pushing the pin inward. Make sure the spring bars snap into the lug holes.

⮕Full tutorial